DI Rubber seat SW Gate Valve for PVC pipes (GV-Z-14)
Quick Detail：ductile iron socket welded Gate valve for PVC HDPE pipes
Design standard: DIN
Body material: Ductile iron GGG50
Wedge: Ductile iron + EPDM/NBR
Nominal diameter: 160MM
Pressure: PN16
End connection: SW socket welded
Face to face: DIN33352 F5
Working temperature: -30℃~+125℃.
Test and inspection: API 598.
Gland Gate valve
Product Range Size: 2″-14″ 50mm-355mm
Connection: Flange ends conform to EN1092-1
Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50
Optional Wedge Seat: EPDM, NBR
Optional Design: DIN /SABS with difference Face to face length
Optional Ends: SW for PVC pipes/ PE pipes/ HDPE pipes/ Plastic Pipes
Size Range: 50mm- 355mm (2″-14″)
Pressure Range: PN10, PN16
Optional surface color: RAL5002, RAL5015. RAL5005, red Or customized
Optional Operation: square Nut, Handwheel
• PN10/16/PN25 Resilient Seated Gate Valve is operating by the EPDM covered iron wedge moving perpendicular to the flow axis through a worm machined stem multi turned
• 100% tight sealing is achieved through EPDM covered wedge fully contacting. The fusion bonded epoxy coated flow surface
• In each time the valve is opened, the flow on the line cleans the sealing surface, Prevents from dirt and deposits
• With its short installation length ( DIN 3202 F5), does not occupy a big place
• It has ductile iron body and stainless steel stem
• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy
• Suitable to install actuator and gearbox
• Suitable to use with ground and underground applications. Can be operated with extension spindle
• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
Hot Water, Cold Water, Fluids without acidity or alkalinity properties
