A216 WCB big size Check Valve with ANSI B16.34
A216 WCB big size 20inch ANSI B16.34 swing Check Valve
Standard: ANSI B16.34
Big size swing check valves.
diameter: 16” 16inch 20inch
Pressure range: 150LBS
Bolted Cover Design.
Flanged ends RTJ
Butt welded Ends ANSI B16.25
Test and inspection: API 598.
Customized Design can be negotiated
Production Range:
Optional Stem: Stainless steel /SAF2507/SAF2205
Optional Seat & Trim: , STL, 2CR13, stainless steel/ Duplex Stainless steel
Optional End: Butt Welded ends, RTJ, RF.
Range of valve big sizes: 14″~60″ (DN350~DN1500).
Range of pressure: 150lbs~1500lbs (PN16~PN250).
storage, use and installation
1 The two ends of the valve passage shall be sealed with sealing caps and stored in a dry and ventilated room. Long-term storage should be checked frequently to prevent corrosion
2 Before installation, the valve should be cleaned and the eliminated defects that may be caused during transportation.
3 Before installation, it is necessary to check carefully whether the signs and nameplates on the valves meet the requirements for use.
4 This valve shall be installed in an upright or side-lying position on horizontal or vertical pipelines, and shall be convenient for maintenance and operation.
5 This valve should be fully open or fully closed during operation, and can’t be used for throttling to avoid the sealing surface being washed away and accelerating wear.
Application:
The medium is water, steam, gas, corrosive medium, oil, medicine, etc.
not suitable for media with solid particles and high viscosity.
Optional Stem: Stainless steel /SAF2507/SAF2205
Optional Seat & Trim: , STL, 2CR13, stainless steel/ Duplex Stainless steel
Optional End: Butt Welded ends, RTJ, RF.
Range of valve big sizes: 14″~60″ (DN350~DN1500).
Range of pressure: 150lbs~1500lbs (PN16~PN250).
1 The two ends of the valve passage shall be sealed with sealing caps and stored in a dry and ventilated room. Long-term storage should be checked frequently to prevent corrosion
2 Before installation, the valve should be cleaned and the eliminated defects that may be caused during transportation.
3 Before installation, it is necessary to check carefully whether the signs and nameplates on the valves meet the requirements for use.
4 This valve shall be installed in an upright or side-lying position on horizontal or vertical pipelines, and shall be convenient for maintenance and operation.
5 This valve should be fully open or fully closed during operation, and can’t be used for throttling to avoid the sealing surface being washed away and accelerating wear.
The medium is water, steam, gas, corrosive medium, oil, medicine, etc.
not suitable for media with solid particles and high viscosity.
