Cast Iron ANSI brass seated Gate Valve GV-H-AF06

Quick Detail：150LBS metal seated flanged gate valve with NRS
Design standard: AWWA C515 Non rising stem
Body material: ductile iron A536
Wedge: Ductile iron + Bronze
Stem：stainless steel 410
Nominal diameter:6″,
Pressure: 150LBS
End connection: FLXFL flanged ends
Face to face: AWWA ANSI B16.10
Working temperature: -30℃~+200℃.
Test and inspection: API 598.
Red color epoxy powder coated Min. 250 Microns.

Optional Connection: Class 125/150 flange/300LBS
MJXMJ / Flange x MJ / SOCKET Ends X flange
Optional Material: Ductile iron ASTM A536 /Cast iron ASTM A126
Optional Seat: Bronze, brass, SS304, SS316, rubber EPDM, NBR
Design: non-rising stem/ Rising Stem
Surface treatment: FBE epoxy coating red, black, blue
Standard Meets AWWA C515/ AWWAC509/ ANSI B16.34
Size Range; 2”-16
Temperature Range: -30℃~+200℃.
Pressure Range: 150PSI, 225PSI, 250PSI

AWWA Gate Valves are specifically designed for heavy pressure service. Neck, flanges, and bell are made extra heavy to withstand pipe strain and possible shifting. Body, cover, gates, and stem are built for extra strength, with clean and simple internal construction, to assure long service and low maintenance.

Turning the stem releases the wedging pressure on the gates allowing them to move away from their seats before starting upward travel. Further turning of the stem raises the gates into the fully opened position. When closing the valve, the gates move freely downward without friction, to a position opposite their seats. As the gates approach the bottom of the valve, the iron hooks come into contact with stops which prevent further downward movement of the hooks. The bronze wedges riding on these hooks spread the gates apart and force them against their seats.

Tap water, sewage, buildings, and energy systems for water treatment