PN10 PN16 Cast Iron Globe valve
Quick Detail
Design standard: DIN3202 F1
Body material: cast iron
Seat/Plug: ductile iron +brass
Nominal diameter: DN65 2-1/2″
Pressure: PN16
End connection: flange RF
Face to face: EN558-1, DIN3202 F1
Working temperature: -30℃~+300℃.
Test and inspection: API 598.
Connection: Flange to EN1092-1
Epoxy Powder coated inside and outside Min. 250 Microns
Available material of the body: GGG40, GGG50, ASTM A536
Available seat seal: Stainless steel 304, SS316. Bronze. Brass, Gunmetal
Pressure Range: PN6, PN10 PN16 150LBS
Size Range: DN15-DN450
Optional Face to Face Design: ANSI BS customized
Optional color for Epoxy Coated: Red, blue, green, gray, black.
• PN10/PN16/PN25 Metal Seated Globe Valve is operating by the Brass seated iron wedge
• Moving perpendicular to the flow axis through a worm machined stem multi turned
• Tight sealing is achieved through Brass seated on wedge fully contacting. The body seated ring, Leakage Grade is up to Grade B as Min.
• In each time the valve is opened, the flow on the line cleans the sealing surface, Prevents from dirt and deposits
• With its short installation length( DIN3202 F1), doesn’t occupy a big place
• It has ductile iron body and stainless steel stem
• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy
• Suitable to install actuator and gearbox
• Suitable to use with ground and underground applications. Can be operated with extension spindle
• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
Hot Water, Cold Water, Sewage Water, Fluids without acidity or alkalinity properties
