ANSI Cast Iron y stainer
Quick Detail
Design standard: ANSI
Body material: Cast iron, ductile iron
Screen/mesh: ss304, ss316
Nominal diameter:2″4″ 6″ 8″
Pressure: 125LBS/150LBS
End connection: RF. Flange
Face to face: ANSI B16.10
Working temperature: -30℃~+300℃.
Test and inspection: API 598.
y-strainer with drain Plug
Product Range Size: 1″-18″ DN25-DN450
Connection: Flange ends conform to ANSI B16.9
Features
● Y-STRAINERS furnished as standard in sizes 18″.
● A one-quarter turn securely locks the screen in its seat.
●Allows for easy bolting of the cover flange.
●Tapered seats in both the body and cover flange retain screen and prevent particle bypass Construction.
● All covers have NPT blowoff outlet at location C. See next page.
● Recessed seat in the cover assures accurate screen alignment.
● Bosses at the inlet and outlet flanges are provided for the gauge taps Capacity.
● Generously proportioned bodies.
● Open Area Ratio much greater than pipe size, ensuring low pressure drop.
Typical Service
● Used extensively to strain foreign matter from pipe lines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment.
Maintenance on Spare Parts
To order replacement screens or gaskets, which are the only items normally required, you should specify the following:
A. Size and model number of strainer or casting number as it appears on the body of the strainer.
B. Specify the type of service. For example: water, steam, gas, oil,air. The working pressure and temperature of the system and the particle size to be strained out should also be specified.
● Y-STRAINERS furnished as standard in sizes 18″.
● A one-quarter turn securely locks the screen in its seat.
●Allows for easy bolting of the cover flange.
●Tapered seats in both the body and cover flange retain screen and prevent particle bypass Construction.
● All covers have NPT blowoff outlet at location C. See next page.
● Recessed seat in the cover assures accurate screen alignment.
● Bosses at the inlet and outlet flanges are provided for the gauge taps Capacity.
● Generously proportioned bodies.
● Open Area Ratio much greater than pipe size, ensuring low pressure drop.
