Cast Iron foot check valves with SS screen (CV-R-01)
Quick Detail
Design standard: DIN/BS
Body material: Ductile iron GGG50
Seat: NBR rubber
Strainer: SS304
Nominal diameter: 4” DN100
Pressure: DIN PN16
Working temperature: 0℃~+80℃.
Test and inspection: EN12266-1
Connection: Flange ends conform to EN1092-1
Epoxy Powder Coated inside and outside
Product Range:
Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50
Optional Seat Ring: NBR, EPDM
Optional Ends: BS4504/EN1092-1 PN16
Size Range: DN50-DN250 (2”-10”)
Pressure Range: PN10, PN16
Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized
|
Performance: |
||
|
1. The foot valve is a kind of energy-saving valve. 2. Generally installed at the bottom end of the underwater suction pipe of the pump to restrict the liquid in the pump pipe from returning to the water source. 3. There are many water inlets and reinforcing ribs on the bonnet, which are not easy to block, and are mainly used in pumping pipelines. T |
||
|
• Coated with fusion bonded epoxy Min. 250 microns. |
||
Application:
Water, oil, and non-corrosive media
Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50
Optional Seat Ring: NBR, EPDM
Optional Ends: BS4504/EN1092-1 PN16
Size Range: DN50-DN250 (2”-10”)
Pressure Range: PN10, PN16
Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized
1. The foot valve is a kind of energy-saving valve.
2. Generally installed at the bottom end of the underwater suction pipe of the pump to restrict the liquid in the pump pipe from returning to the water source.
3. There are many water inlets and reinforcing ribs on the bonnet, which are not easy to block, and are mainly used in pumping pipelines.
4. Coated with fusion bonded epoxy Min. 250 microns.
Water, oil, and non-corrosive media
