Rubber Expansion Joints For Shock Absorber in EPDM

Maximum pressure
From DN 20 to DN 200: 16 Bar at 20° C
Drilling: PN 16 from DN 20 to DN 150, PN 10 for DN 200
Temperature – 15° C / + 100° C

The vibration absorber joints must not be used to absorb axial or lateral movements, large amplitude vibrations, torsions or angular movements. Each joints must always be installed between two fixed points correctly designed. Joints must be installed at the supplied H lenght without any initial tension. Mating flanges must be parallel and correctly lined up.