Cast iron swing check valves with metal brass seat CV-F-02
Quick Detail：Ductile iron/cast iron flanged PN16 swing check valves with metal brass seat
Design standard: DIN3202 F6
Body material: ductile iron
Nominal diameter: DN65 2-1/2”
Pressure: PN16
End connection: RF. Flange
Face to face: EN558-48 DIN3202 F6
Working temperature: -30℃~+350℃.
Test and inspection: API 598.
BC bonnet cover Check Valve
Stainless steel bolts and Nuts
Epoxy Powder coated Min. 250 Microns.
Products Range:
Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50
Available Disc Material: Ductile iron, Bronze
Optional Seat Ring: Brass, Bronze, SS304, SS316, EPDM
Optional Design: DIN /BS/ ANSI with difference Face to face length
Optional Ends: BS4504/EN1092-1 PN16/ ANSI B16.5 RF
Size Range: DN50-DN600 (2”-24”)
Pressure Range: PN10, PN16, PN20(150LBS)
Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized
Optional lever weight and spring load
Performance
• Swing Check Valve, while allowing the flow moving to the desired flow direction, stops the flow when exposed to backflow
• The disc hinged inside the body is placed within the flow section
• With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass
• When the flow stops, the disc sits on the machined sealing seat through its own weight and maintains 100% tight sealing
• Valve body and disc is cast Ductile iron, sealing surfaces are made of brass material or EPDM Rubber
• Head loss is lower compared to other check valve types
• Coated with fusion bonded epoxy
Application:
Widely used in tap water, sewage, construction, petroleum, chemical, food, medicine, textile, power, shipbuilding, metallurgy, energy system and other pipelines
Available Body Material: Cast Iron GG25, Ductile iron GGG40, GGG50
Available Disc Material: Ductile iron, Bronze
Optional Seat Ring: Brass, Bronze, SS304, SS316, EPDM
Optional Design: DIN /BS/ ANSI with difference Face to face length
Optional Ends: BS4504/EN1092-1 PN16/ ANSI B16.5 RF
Size Range: DN50-DN600 (2”-24”)
Pressure Range: PN10, PN16, PN20(150LBS)
Optional surface color: RAL5002, RAL5015. RAL5005, red, black. Or customized
Optional lever weight and spring load
• Swing Check Valve, while allowing the flow moving to the desired flow direction, stops the flow when exposed to backflow
• The disc hinged inside the body is placed within the flow section
• With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass
• When the flow stops, the disc sits on the machined sealing seat through its own weight and maintains 100% tight sealing
• Valve body and disc is cast Ductile iron, sealing surfaces are made of brass material or EPDM Rubber
• Head loss is lower compared to other check valve types
• Coated with fusion bonded epoxy
Widely used in tap water, sewage, construction, petroleum, chemical, food, medicine, textile, power, shipbuilding, metallurgy, energy system and other pipelines
