Company News
-
The Performance Comparison of DBB and DIB trunnion Mounted ball valve
Table 1 The Performance Comparison of DBB and DIB trunnion Mounted ball valve Seat place ConstructionType Fuid DirectionRequirement Multiple seal FigureNo. Seal ability Service life Upstream valve seat Downstream valve Seat SPE SPE DBB NO 1 Fig.1 Good OK DPE DPE DIB-1 NO 4 Fig.2 Better...Read more -
Basket Strainer
Basket Strainers , the screen can be removed from top. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal. They are intended for applications where large amounts of solids particulate are exp...Read more -
The metal seated check valves we can supply
Wafer check valves are in-line piping valves used to control fluid flow direction and reduce or fully prevent possible back flow within plumbing systems. Wafer check valves are also known as clack valves, reflux valves, non return valves and one way valves. This valve type has been engineered to ...Read more -
Introduction of duplex SS UNS31803
Duplex UNS S31803 Duplex UNS S31803 Technical Information Overview Duplex is an austenitic ferritic Iron Chromium-Nickel alloy with Molybdenim addition. It has good resistance to pitting, a high tensile strength and higher resistance to stress corrosion cracking at moderate temperatures to that o...Read more -
Flanged Wafer check valves for marine ship
The Wafer Check valves to Saudi Arabia are ready for shipment , The wafer check valves with double flange ends, PN16 flange drilling, and double disc design. It is more ealier for flange connection and more accurate istall on the pipeline. Wafer check valves are in-line piping valves used to co...Read more -
big knife valve for mining project
knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as: Pulp and Paper/ Power plants/Wastewater treatment plants/Chemical plants/Food and Beverage/Bulk...Read more -
AWWAC504 Ebonite Lined Butterfly valve
Ebonite valves may be utilized for both isolation and flow control applications. Over the last 40 years, these products have proven their reliability in sea water cooling systems, offshore and onshore fire mains systems, portable water in desalination plants, and many applications where iron co...Read more -
WRAS Approved gate valve for drinking water
WRAS approved gate valves for drinking water A valve used for drinking water applications is designed to safely transport and control the flow of potable, clean water. To eliminate any health hazard risk, the water needs to be contamination free. Throughout its flow from inlet to outlet, the wate...Read more -
Diaphragm Valves of Incoloy825
Incoloy825 Diaphragm Valve for sea, ready for shipment on Nov.19, 2021. Diaphragm Valves are linear motion valves, bidirectional, bolted bonnet, seatless design, packing free, with a diaphragm as closure element, with rising handwheel. They have a visual position indicator, a yellow stripe in t...Read more -
High-Performance Air Vent Valve with venting flange
customized stainless steel and Duplex stainless steel Air release valve with welded air vent Designed to protect pipelines and vertical turbine pump applications from air lock and vacuum collapse, the High-Performance Combination Air Vent Valve eliminates air and prevents vacuum formations in wa...Read more -
stainless steel knife gate valve with pneumatic actuator
Oct. 25, knife valves shipment for Slurry applicaiton Knife gate valves were originally designed for use in the pulp and paper industry. Utilizing a sharp, beveled edge, a knife gate was ideally designed to cut through the stringy pulp encountered in the pulp and paper industries. The be...Read more -
DN1200 PN10 metal seated ductile iron Gate valve, (BS5150 With bypass & Bevel Gear)
DN1200 PN10 metal seated ductile iron Gate valve, (BS5150 With bypass & Bevel Gear)By pass valve is a protective measure for the main valve to prevent the opening resistance from being too large due to the excessive pressure difference between the front and back of the valve, and the valve is...Read more
